Description
Specifications
- Mfr Part Number: FD-FAN-DYN-X2-GP12-WT
- Features:
- High grade LLS bearing with class leading 100,000 hours MTBF
- Equipped with a counter-pull magnet that reduces the axial tension on the bearing
- Fan geometry optimized for a good balance between static pressure and maximum airflow, resulting in good performance in all usage scenarios
- Aerodynamically shaped stator struts including the wire strut. Helps reduce noise and unwanted turbulence
- Stator struts sit on a wide angle to the trailing edge of the blades which result in a lower noise level and smoother noise profile
- Strategically placed notches near the fan hub on the trailing edge of the blades further reducing the humming noise produced when the blades pass the stator struts
- A “trip wire” on the rear side of the blades near the leading edge. The trip wire introduces a larger turbulent boundary layer at an earlier stage, this delays the layer separation and improves both airflow and noise characteristics.
- The customized design of the Dynamic Series fans contributes to a beautiful, cool build
- Rotational Speed: 1200 RPM
- Acoustical Noise: 19.4 dB (A)
- Maximum Air Flow: 52.3 CFM
- Maximum Pressure: 0.88 mm H2O
- Actual Input Power: 1.32 W
- Maximum Rated Input Current: 0.18 A
- Nominal Input Voltage: 12 V
- Minimum Startup Voltage: 4 V
- Screw Hole Pattern: 105 x 105mm
- Connector: 3-pin fan header
- Bearing: LLS
- Number of Blades: 7
- MTBF: 100,000 hours
- Cable Length: 500 mm
- Cable Type: Black Ribbon Cable
- Color: White blades, Black frame
- Dimensions: 120.0 x 120.0 x 25.0 mm
- Weight: 119.0 g
- Package Contents: Dynamic X2 Series fan; Screw pack with 4 metal fan screws
Reviews
There are no reviews yet.